AQUAGUARD 100

AQUAGUARD 100 is based on sodium HexaMetaPhosphate and is used to inhibit corrosion and hardness scale formation in domestic water and commercial potable water systems. It may be injected continuously without the formation of excessive scale in the pipe line. AQUAGUARD 100 effectively inhibits corrosion to minimize "red water," prevents scale formation, is approved for use in domestic and potable water applications, can be dosed directly from the drum, and allows for simple on-site testing for reliable monitoring

A phosphate reserve is normally maintained within set limits in the domestic water. The correct treatment level depends on operating conditions such as the chemical characteristics of the water. The optimum treatment level for any plant will be specified by BCI sales Engineer. The treatment may be injected using a dosage pump or a dosage pot as appropriate to the particular installation. Its viscosity permits handling by conventional dosage pumps without dilution but it may be diluted if desired. AQUAGUARD 100 is not corrosive to mild steel mixing tanks or dosage pumps in concentrated or dilute form.

For more information on the safe handling, storage, and disposal of chemical products, please refer to the most recent Safety Data Sheet (SDS).

AQUAGUARD 100 is used as corrosin and scale inhibitor for domestic water systems. Consult your BCI sales Engineer for specific recommendations.

• 220 L Drum • 25 L Jerrycan